High-flow applications
Our team checks connection size, test points and setup suitability for water systems and production processes before booking.
Mobile Flowmeter Calibration
Flowmeter calibration with a mobile laboratory up to 300 m³/h
SK’s experienced technicians and engineers provide mobile liquid flowmeter calibration across Thailand, supporting up to 300 m³/h under the applicable scope and site conditions. Other arrangements remain subject to documented scope.
FlowmeterUltrasonic FlowmeterMagnetic Flowmeter
Request Quotation →
Mobile Flowmeter · SK Calibration Laboratory
Bring flow calibration closer to your facility
SK’s mobile laboratory brings a calibration setup and reference instruments to facilities across Thailand, with location, scheduling and site conditions confirmed before booking. Suitable meters can be tested with the vehicle’s setup without off-site shipping. Removal from the process and reconnection may be necessary; this is not a promise of calibration during continuous production.
300 m³/h
Maximum flow under applicable mobile scope
Across Thailand
Visits coordinated by province and site conditions
Mobile Laboratory
Vehicle-based flow calibration setup
Why choose SK’s mobile flowmeter service?
Coordinate work at your facility
Eligible work can reduce off-site instrument shipping and support coordination with maintenance and QC teams.
Capability is not blanket accreditation
The vehicle’s maximum capacity does not cover every meter, test point or condition. The method and accredited scope are confirmed for each job.
SK flowmeter fieldwork and mobile laboratory
Test setup, measurement and on-site coordination by experienced technicians and engineers.
Flowmeter calibration for water systems and industry
Submit details of factory water meters, utility systems or water systems supporting food and beverage production for assessment. Fluid, range, connections and applicable scope must be confirmed; the vehicle does not support every process or medium.
Flowmeters for industrial applications
We assess different flowmeter types by technology, range, medium and actual installation. These are instrument examples, not a claim that every model shares the same accredited scope.
Mobile scope reference information
- Listed instruments
- Ultrasonic, variable area, Coriolis and magnetic flowmeters
- Listed flow ranges
- 1–300 and 50–300 m³/h, according to the relevant entries
- Medium and temperature
- Water, 15–40 °C, subject to documented conditions
- Reference methods
- SK-WI-018 / SK-WI-019 with reference flow meters, per Mobile Laboratory entries
Consult the applicable scope for CMC and conditions. CMC is not the customer meter’s accuracy. Other arrangements and ranges remain listed in the scope below.
Check flow scope and accreditation documents →Prepare for a mobile laboratory visit
- 01
Share model, photographs, pipe/flange size and output signal
- 02
Specify working range, test points, medium and certificate needs
- 03
Confirm parking, access, water, electricity, drainage and safety with our team
- 04
Agree meter reconnection, shutdown requirements, method and schedule
Service Overview
Liquid flowmeter calibration for industrial lines and process measurement. We support common flow technologies and provide practical reporting for maintenance teams, production engineers and quality departments.
Typical Applications
- ✓ Water and process liquid measurement
- ✓ Production batching
- ✓ On-site flow verification
Our Calibration Capabilities
Verified scope information matched to this service. Open a capability to review its complete instruments, ranges, CMC and accreditation evidence.
TISI 0261ANAB AC-3279
Flow Calibration
Liquid flowmeter calibration for production processes, utility systems and quality control.
- Verified scope rows
- 26
- Supported instruments
- 5
- Flowmeter
- Ultrasonic Flowmeter
- Magnetic Flowmeter
- Coriolis Flowmeter
Instruments We Calibrate
FlowmeterUltrasonic FlowmeterMagnetic FlowmeterCoriolis FlowmeterTurbine FlowmeterVortex Flowmeter
Need Flow Meter Calibration?
Contact our sales team for scope confirmation, technical guidance and a quotation.
Request QuotationFAQ
Does the mobile laboratory support 300 m³/h in every case?
300 m³/h is the maximum under relevant mobile entries, not blanket accreditation. Meter type, range, medium, temperature, connections and applicable scope must be confirmed before quotation.
Must the flowmeter be removed for mobile calibration?
Removal and reconnection to the vehicle setup may be necessary. Our team agrees the method, reconnection and any shutdown in advance; calibration during continuous production is not guaranteed.
How should we prepare for a mobile laboratory visit?
Send site and access photos, meter details, pipe or flange size, test points and medium. Confirm parking, water, electricity, drainage and safety requirements with our team before booking.
Does SK provide mobile flowmeter services across Thailand?
SK coordinates nationwide service. Share the province, site, quantity, range and preferred dates so technicians and engineers can confirm site readiness, scope, schedule and costs.
Are all flowmeters calibrated using the same method?
No. Technology, fluid, range and output signal affect the setup and method, so instrument details must be reviewed first.
Can a flowmeter be calibrated on site?
Some applications are feasible after reviewing workspace, pipe runs, fluid conditions, installation, safety and suitable reference equipment.
What flowmeter calibration workflow should be agreed?
Send the nameplate, installation photos, operating flow points and fluid details for laboratory assessment. Agree the location, method and whether the display or a specific output signal will be read. Prepare the meter and associated equipment as instructed, then review results at each point against process criteria. If settings need changing, agree how values before and after the change will be recorded.
What should be confirmed in flowmeter calibration documents?
Identify the meter and associated display, units, measurement points and signal to be calibrated. Provide the previous certificate and relevant settings if available. Ask the laboratory to confirm the test fluid and conditions, method, reported results and uncertainty, and accreditation status for this work. If a pass or fail statement is needed, agree criteria and the decision rule before work starts.
Related calibration guides
View all guidesAsk SK to review your flowmeter
Send the brand, model, serial number, quantity, installation photos, flow range, fluid and output signal, plus the location and acceptance criteria, so the team can assess suitability before quotation.
Request a flowmeter calibration quotation →